DPC-UART CONVERTER DPC-UART Converter 5417-1251

DPC-UART CONVERTER DPC-UART Converter

The USB-UART Converter is used to connect a Woodward control or protection unit with a PC or laptop for configuration and monitoring purposes. It Interfaces with RJ45 Connector and Standard USB Port. The PC/laptop side is separated from the Woodward unit side through galvanic isolation. Part number 5417-1251 is dedicated for use with easYgen* family devices, while P/N WIC1PC3 is dedicated for use with WI family devices.

Detaylar
RP-3000XT 3100XT/3400XT, Remote Panel

RP-3000XT 3100XT/3400XT, Remote Panel

Touch screen remote control and annunciation panel for use with the easYgen-3000XT series controls.

Detaylar
IKD1 I/O expansion 8440-2028

IKD1 I/O expansion

The IKD 1 is a smart solution to increase numbers of digital I/O’s to Woodward easYgen series controllers and related products. It is possible to connect one or more IKD 1 units to the genset controllers.​​

Detaylar
RP-3000 3100/3200/3300/3400, Remote Panel

RP-3000 3100/3200/3300/3400, Remote Panel

Remote control and annunciation panel for use the back-panel mounted easYgen-3100/3400 or door-mounted easYgen-3200/3500 genset controls.

Detaylar
RP-3000 3400/3500 Marine, Remote Panel

RP-3000 3400/3500 Marine, Remote Panel

Remote control and annunciation panel for use the easYgen-3400 and easYgen-3500 marine genset controls.

Detaylar
DL-CAN CAN Fiber Optic Gateway

DL-CAN CAN Fiber Optic Gateway

DL-CANR allows the connection of CAN networks by using redundant fiber optic systems Received data telegrams are refreshed. This allows to built up structures with a high number of systems.

Detaylar
DL-CANR CAN Fiber Optic Gateway (Redundant)

DL-CANR CAN Fiber Optic Gateway (Redundant)

DL-CANR allows the connection of CAN networks by using redundant fiber optic systems Received data telegrams are refreshed. This allows to built up structures with a high number of systems.

Detaylar
ESENET Ethernet Gateway

ESENET Ethernet Gateway

ESENET is an Ethernet gateway specifically designed to interface Woodward's Easygen series genset controls with Modbus/TCP networks. It interfaces via the load sharing CAN bus with the Woodward controls.

Detaylar
EPU-100 Electronic Pickup Unit, Asynchronous Gen

EPU-100 Electronic Pickup Unit, Asynchronous Gen

The EPU-100 (Electronic Pickup Unit) receives electrical signals and converts it into a "MPU signal". This information about the speed of rotation of the asynchchronous generator can be fed into a genset control (for example an easYgen). So the genset control can decide for connecting the asynchronous generator to the mains/utility. Woodward's EPU-100 is particular suitable to work with the very small voltage (as low as 0.5 Vac and as high as 600 Vac) a asynchronous generator produces until it’s breaker is closed.

Detaylar
ESEPRO Profibus Gateway

ESEPRO Profibus Gateway

ESEPRO is a Profibus gateway specifically designed to interface Woodward's Easygen series genset controls with Profibus-DP networks. It interfaces via the CAN bus with the Woodward controls and is easy to configure using standard Profibus configuration tools like Simatic Manager.

Detaylar
EASYLITE-100 CAN Bus Based Remote Annunciator

EASYLITE-100 CAN Bus Based Remote Annunciator

The easYlite-100 annunciator is designed to remotely display the status of a generator control system through a CAN bus interface. The easYlite-100 may be used where an additional status display is required, which is directly connected to the generator control unit.

Detaylar